Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

A molecular orbital study of the rotation about the C-C bond in 1,3-butadiene

The geometry and energy of 1,3-butadiene have been calculated using the 6-311G** basis set as a function of the CCCC dihedral angle-0 ° (trans), 30 °, 60 °, 75 °, 90 °, 120 °, 135 °, 150 °, 165 ° and 180 ° (cis)-assuming that the vinyl groups remain planar. Potential minima are located at 0 ° and 141.4 °, with the trans structure more stable than the gauche by 13.2 kJ mol^–1. Potential maxima are located at 76.7 °, giving a barrier height of 25.4 kJ mol^–1 relative to the trans structure, and at 180 ° giving a barrier height of 3.0 kJ mol^–1 relative to the 141.4 °-gauche structure. Using the 6-31G* basis set the inclusion of electron correlation, accounting for about 52% of the correlation energy, was found to produce no significant change in the shape of the potential energy curve. The magnitude of the expectation energy differences is such that both barriers with respect to the 14l.4 °-gauche maximum structure can be categorized unequivocally as attractive-dominant, whereas the values for the energy barrier with respect to the trans structure, although characteristic of a repulsive-dominant barrier at the 6–311G** level, are sufficiently small that higher level calculations might give the opposite result. Analysis of V _nn for the conversion reactions cis 150 °-gauche, trans 60 °-gauche, and trans 90 °-gauche in terms of the individual contributions from the various internuclear interactions shows that nonbonded interactions are important, not only in initiating the destabilization of the crowded cis structure, but also through-out the entire range of CCCC dihedral angles, 0 ° to 180 °.     

Hepatobiliary excretion and brain distribution of caffeine in rats using microdialysis

To investigate the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine, this study uses a method based on microdialysis technique and liquid chromatography that allows continuous and concurrent in vivo monitoring of extracellular caffeine in the blood, brain and bile of anesthetized rats following the administration of caffeine (3 or 10 mg/kg, i.v.) through the femoral vein. Dialysates of the blood, brain and bile were directly injected onto the liquid chromatographic system and no further clean-up procedures were required. The study design consisted of two groups of six rats in parallel: the rats of the control group received caffeine (3 or 10 mg/kg, i.v.) alone and those of the cyclosporine treated-group were injected cyclosporine (10 mg/kg, i.v.) 10 min prior to caffeine administration (3 or 10 mg/kg, i.v.). The decline of caffeine in the blood, brain striatum and bile suggested that caffeine had rapid exchange and equilibration between the peripheral compartment and the central nervous system. In addition, the results indicated that caffeine underwent hepatobiliary excretion and was distributed into brain. When cyclosporine was co-administered, the pharmacokinetic parameters were not significantly altered. The results of this study reveal that the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine might not relate to P-glycoprotein.     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.     

Oxidation of Styrene in a Silent Discharge Plasma

A silent discharge plasma reactor has been developed to study the oxidation of styrene vapor in argon/oxygen mixtures. A number of analytical techniques were employed to determine the destruction efficiency and to characterize the intermediate products. The destruction efficiency was measured as a function of initial styrene concentration, temperature, and energy density of the plasma. The formation of solid products was observed in most experiments. At low temperature (100°C), the solid deposit was polymeric in nature, while at high temperature (300°C) the solid appeared to be amorphous carbon. A combination of high temperature and high energy density resulted in high destruction efficiency and minimal production of solid films. The destruction efficiency vs. energy density is shown to be more complex than a simple model predicting exponential behavior. Several reasons for the discrepancy are suggested. The e-folding energy density for the destruction of styrene is compared to literature values for other organic compounds, measured using similar types of plasma reactors.     

苯乙烯－马来酸酐共聚物单分子膜的静、动态性质

对不同分子量的苯乙烯－马来酸酐共聚物（PSM）单分子膜的π－A等温线、微 分曲线进行了研究，讨论了PSM单分子膜成膜过程及分子量对膜相变的影响，并用 动态膜障振动法测定了PSM单分子膜的动态弹性，结果表明，分子链的相互作用（ 如卷曲和缠结）在膜的形成中起着重要的作用，并影响膜的静、动态性质，单分子 膜的动态弹性曲线有双峰，且前者比后者小，随分子量增大，膜的凝聚性、刚性和 稳定性都增强，动态弹性都增大；且分子链的相互作用对PSM单分子性质影响增大 ，压缩过程中单分子膜的相变更明显。     

Plasma-Chemical Conversion of Lower Alkanes with Stimulated Condensation of Incomplete Oxidation Products

Oxidative conversion of a mixture of natural gas and oxygen in a barrier-discharge plasma-chemical reaction was investigated experimentally. The process was conducted at atmospheric pressure and room temperature. The discharge was initiated by high-voltage pulses of 50–100 s duration at a repetition frequency of up to 2 kHz. The principal feature of the process was that in the plasma-chemical reactor conditions were created which stimulated the condensation of the products of incomplete oxidation of methane that resulted in the formation of aerosol even from nonsaturated vapor. The removal of intermediate reagents from the gaseous phases into the aerosol prevented them from further oxidation. Depending on the experimental conditions, the mass percentage of the components of the condensate formed varied within the following limits: formic acid from 20 to 40%, methanol from 8 to 15%, methylformate from 4 to 8%, and water from 40 to 60%. The conversion process has been realized on a laboratory setup of average power up to 1 kW. In the single-pass mode, a 57% degree of conversion of the mixture has been achieved. The energy value of the condensate is 15–20 kWh/kg.     

Molecular structure and spectral properties of thionaphthalimides

The molecular structure and absorption spectra of monothio- and dithio-naphthalimides were compared to their naphthalimide analogues using AM1, PM3 and ZINDO/S semiempirical quantum chemical methods. The substitution of the 4R-naphthalimide oxygen atoms by sulphur atoms resulted in a red-shift of the absorption spectra by Δλ_max60-65 and 100-140 nm, respectively. The thionated naphthalimide derivatives do not show observable fluorescence due to intersystem crossing to the triplet -states localised at the CS groups. The -absorption bands of monothioimides are located at 525-580 nm (ε=60-80) and those for dithioimides at 535-560 nm (ε=140-390) and 628-686 nm (ε=34-68). None of these transitions are solvent sensitive. The -transitions of N-phenylthioimides have also a small contribution from -states due to a partial conjugation between CS group and π-electronic system of the N-phenyl ring. As a result, the bands of aromatic substituted N-phenylthioimides are red-shifted as compared to those of the aliphatic N-methyl-thioimides.     

Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

Validated UPLC‐MS/MS method for determination of moclobemide in human brain cell supernatant and its application to bidirectional transport study

A simple and sensitive analytical method based on ultraperformance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) has been developed for determination of moclobemide in human brain cell monolayer as an in vitro model of blood–brain barrier. Brucine was employed as the internal standard. Moclobemide and internal standard were extracted from cell supernatant by ethyl acetate after alkalinizing with sodium hydroxide. The UPLC separation was performed on an Acquity UPLC^TM BEH C₁₈ column (50 × 2.1 mm, 1.7 µm, Waters, USA) with a mobile phase consisting of methanol–water (29.5:70.5, v/v); the water in the mobile phase contained 0.05% ammonium acetate and 0.1% formic acid. Detection of the analytes was achieved using positive ion electrospray via multiple reaction monitoring mode. The mass transitions were m/z 269.16 → 182.01 for moclobemide and m/z 395.24 → 324.15 for brucine. The extraction recovery was 83.0–83.4% and the lower limit of quantitation (LLOQ) was 1.0 ng/mL for moclobemide. The method was validated from LLOQ to 1980 ng/mL with a coefficient of determination greater than 0.999. Intra‐ and inter‐day accuracies of the method at three concentrations ranged from 89.1 to 100.9% for moclobemide with precision of 1.1–9.6%. This validated method was successfully applied to bidirectional transport study of moclobemide blood–brain barrier permeability. Copyright © 2013 John Wiley & Sons, Ltd.